User Manual

FAS1533 User's Guide UltraClenz, LLC
Page 4
3.0 Service Flag
3.1 Purpose
The service flag is used to indicate the dispenser needs a replacement cartridge. When
the service flag is moved from the down (resting)position to the up (latched)
position (seeFig.2),the replace cartridge bit will be set and transmitted on the next
heartbeat message. When the attendant has replaced the cartridge the service flag will
be returned to the down position the replace cartridge bit will be cleared and
transmitted on the next heartbeat.
3.2 Procedure
1. Apply power to the FAS1533.
2. Move the service flag from the down to the latched up position.
3. Both led's will flash twice.
4. Wait a few seconds.
5. Move the service flag from the up position to the down.
6. Both led's will flash once.
4.0 Range Buttons
4.1 Purpose
The purpose of the Range switches is to increase (+) or decrease (-) the low
frequency communications distance between the dispenser beacon and badge.
Fig.2 - Service Flag Latched in the Up Position