User Manual

ProClenz DSP2000 Performance UltraClenz, LLC
Page 7
In the “File name” field enter the desired file name and click the “Save” button to save the new Badge
configuration file.
The fourth source is to read the configuration from a previously configured Badge. Before the configuration can be
uploaded from a Badge it must be scanned and have its address displayed in the “Badge Control”. Select the
desired Badge from the list by clicking on its address. Click the “Read” button in the “Pod Control”. The
Application will now retrieve the configuration from the selected Badge and place it in the “Badge Settings”.
The fifth source for changing the Badge configuration is to use the “Full Badge Settings”. This should be used
only by experienced Application users familiar with configuring Badges. This is a part of the window that is not
displayed when the Application is first launched. To make the “Full Badge Settings” visible, click on “Tools” on the
Application menu bar. Then select the “Full Badge Settings” option and the Application will display the “Full Badge
Settings” part of the window (see Figure 6). This is broken into two parts, a tree with the options for each Badge
state listed directly under that state, and an “Option Editing Area” where controls for editing the selected option
will appear. The procedure for making a change to the Badge configuration is to select an option by clicking on
the desired option, then using the editing tool that appears in the “Option Editing Area” to make the appropriate
change to the selected option.
Figure 6 Full Badge Settings
4.4 Saving a Badge Configuration
Saving a badge configuration for future use is done by clicking on “File” on the menu bar, then selecting “Save
Configuration”. A window will open were it is possible to navigate to a folder were the configuration is to be saved.
In the “File name” field enter the desired file name and click the “Save” button to save your new Badge
configuration file.
4.5 Downloading a configuration to a Badge
Downloading a configuration to a Badge or Badges: to do this click on the “Download” button in the “POD
Control”. A word of Caution, the POD will change the settings of all Badges in its range not just the Badges
displayed in the “Badge Control”.
4.6 Setting a Badge or Badges to a New Sanitary State
To set a Badge or Badges to a new sanitary state select the “Tools” item on the “Menu” bar then click on the “Set
Badge State” selection. A new window will be displayed, select the desired state and click on the “Update
Badges” button and the Application will change all Badges in range to the new state.
Option Editing Area
Badge Sanitary
State
Selectable Configuration
Options