User Manual

DFU Document Title Here
UltraClenz, LLC
Page 13
Configuration
The USB to RS485 Converter will emulate a serial (COM) port on the host PC. It will be necessary to determine which COM
port the USB driver has selected. To do this, follow the steps below.
1. Open the Control Panel
2. Click on Performance and Maintenance (only if Control Panel is setup for Category View)
3. Click on System
4. Click on the Hardware tab
5. Click the Device Manager button
6. Select View -> Devices by Type from the menu
7. Expand Ports in the tree view
The device appears as an additional COM port with the label “USB Serial Port” and the assigned COM port in parentheses.
Example: USB Serial Port (COM3)
Make a note of the assigned COM port and select it when running UltraClenz software.
If the assigned COM port is not desired, it can be changed to any other available port by following the steps below.
1. Double click on USB Serial Port in the Device Manager tree view
2. Click on Port Settings tab
3. Click the Advanced button
4. Select a different COM port from the COM Port Number drop down menu
5. Click the OK button
NOTE:
The driver will assign each USB port to a unique COM port. Please be aware that using different USB ports will require
changing the selected COM port in the PC application software.