User Manual

DFU Document Title Here
8. PIR Sensor Alignment
The sensor alignment
is adjusted by loosening the 1/8” hex screw above the PIR window and by rotating
adjustment tab at the bottom of the PIR sensor window
room’s door frame or entry path. (See Figures 9 and 10)
Figure 7. Left Side PIR
Figure 8. PIR Connector
is adjusted by loosening the 1/8” hex screw above the PIR window and by rotating
adjustment tab at the bottom of the PIR sensor window
. It must be positioned
so that the PIR window is aimed across the
room’s door frame or entry path. (See Figures 9 and 10)
Figure 9. Turret Locking Screw
PIR Sensor Connector
UltraClenz, LLC
Page 10
is adjusted by loosening the 1/8” hex screw above the PIR window and by rotating
the turret with the
so that the PIR window is aimed across the
PIR Sensor Connector