User Manual

DFU Document Title Here
1. PSS Door Monitor Features
The PSS Door Monitor
is designed to track healthcare worker
room, by recording
whether or not a soap or sanitizer dispenser was used during patient room
1.1 Component Descriptions -
Front View (See Figure 1)
Removable Side Cover
This allows the user to change the
PSS Door Monitor
item 1).
Battery Compartment
Remove front cover to allow access to the battery compartment.
battery polarity is s
hown in the battery box (See Figure.1 item 2).
RS485 Data Port
The RS485 Communications Port din connector is used to connect the
Communications port is used to configure
5) Audible Alert
3) RS485 Data Port
2) Battery Compartment
1) Removable Side Cover
4) Green & Red LEDs
is designed to track healthcare worker
hand
hygiene compliance with respect to a specific hospital
whether or not a soap or sanitizer dispenser was used during patient room
entries and exits.
Figure 1. PSS Door Monitor Front View
Figure 2. PSS Door Monitor Back View
Front View (See Figure 1)
PSS Door Monitor
configuration from right side to left
side room entry (See Figure 1
Remove front cover to allow access to the battery compartment.
Insert 2 quality D cell
alkaline
hown in the battery box (See Figure.1 item 2).
The RS485 Communications Port din connector is used to connect the
PSS Door Monitor
to a Host computer.
Communications port is used to configure
the PSS Door Monitor, Upload and Download
data (See Figure 1 item 3)
6) Bypass Button
5) Audible Alert
8) Removable Front
Cover
7) Adjustable Sensor
9) Dispenser Connector
UltraClenz, LLC
Page 4
hygiene compliance with respect to a specific hospital
entries and exits.
side room entry (See Figure 1
alkaline
batteries. Note the
to a Host computer.
The
data (See Figure 1 item 3)
.
8) Removable Front
Cover
7) Adjustable Sensor
9) Dispenser Connector