User Manual

DFU Document Title Here
UltraClenz, LLC
Page 8
3.2.8 Room Exit Counts (Uploaded from the PSS Door Monitor)
• With Dispense
• Without Dispense
• Total Room Exits
NOTE: It is the user’s responsibility to keep track of the date and unit address when counts are uploaded from the
PSS Door Monitor, because the events are not time stamped. The counts will be uploaded and saved as a CSV file
that may be imported into spreadsheet software for data analysis.
3.3 Firmware Version (Uploaded from the PSS Door Monitor)
When the PSS Door Monitor is connected, the firmware version will be displayed.
3.4 Device Address (Uploaded from the PSS Door Monitor)
When the PSS Door Monitor is connected, the device address will be displayed. The device address is unique for each
PSS Door Monitor.
3.5 Upload Configuration
This will upload all of the configuration selections to the PSS Door Monitor unit. Menu selections that are available for
reconfiguration are Interface Options, Mounting Location, Alarm Time, Room Entry/Exit Time and Bypass Timeout
(See Figure 4).
3.6 Download Configuration
This will download the room counts, configuration selections, firmware version and device address from the PSS Door
Monitor unit.
Figure 4. Configuration Settings Screen