Certification Exhibit FCC ID: Z9O-FAS1521 IC: 10060A-FAS1521 FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Project: 14-2067 Manufacturer: UltraClenz, LLC Models: FAS1521-01 User Manual (Part 1 of 2) 3998 FAU Blvd.
PSS Door Monitor User Guide (FAS1521) DOC1059 Revision 2 UltraClenz, LLC
DFU Document Title Here UltraClenz, LLC Table of Contents `Abstract ...................................................................................................................................................................................... 3 Revision History ........................................................................................................................................................................... 3 Terms, Acronyms and Abbreviations ................................
DFU Document Title Here UltraClenz, LLC Industry Canada ..................................................................................................................................................................... 17 Appendix E - Warranty ............................................................................................................................................................... 18 Figures Figure 1. PSS Door Monitor Front View ....................................................
DFU Document Title Here UltraClenz, LLC Abstract This document provides a description of the features of the PSS Door Monitor unit in order to familiarize the user with the unit. Also, a brief description of the PSS Door Monitor functions are given, followed by instructions on how to install the unit.
DFU Document Title Here UltraClenz, LLC 1. PSS Door Monitor Features The PSS Door Monitor is designed to track healthcare worker hand hygiene compliance with respect to a specific hospital room, by recording whether or not a soap or sanitizer dispenser was used during patient room entries and exits. 6) Bypass Button 5) Audible Alert 4) Green & Red LEDs 3) RS485 Data Port 7) Adjustable Sensor 2) Battery Compartment 1) Removable Side Cover 8) Removable Front Cover Figure 1.
DFU Document Title Here UltraClenz, LLC Green & Red LEDs The green and red LEDs provide visual feedback to the healthcare worker (See Figure.1 item 4). GREEN: The single green led flash indicates a door entry or exit with compliance. RED: Indicates a wash compliance warning. Audible Alert The audible alert makes a beeping sound that is used to give feedback to the healthcare worker (See Figure.1 item 5).
DFU Document Title Here UltraClenz, LLC 3. PSS Door Monitor Configuration Software The PSS Door Monitor Configuration Software is a graphical user interface ((GUI), GUI), which allows the installer to set-up set the hardware and software parameters for desired operation. The PSS Door Monitor can be configured for a variety of room layouts. Before installing the PSS Door Monitor Configuration Software on the Host computer, the user ser must first install the RS485 to USB serial Interface driver.
DFU Document Title Here UltraClenz, LLC 3.2 Configuration Options The following configurations setting are set during the installation process only. These settings can only be configured thru the RS485 to USB network Interface. 3.2.1 Operating Mode • Normal PIR - Select when PSS Door Monitor is mounted near a patient room door. • Counter Only - Select when PSS Door Monitor is mounted inside of a patient room but not near a door. 3.2.
DFU Document Title Here UltraClenz, LLC 3.2.8 Room Exit Counts (Uploaded from the PSS Door Monitor) • With Dispense • Without Dispense • Total Room Exits NOTE: It is the user’s responsibility to keep track of the date and unit address when counts are uploaded from the PSS Door Monitor, because the events are not time stamped. The counts will be uploaded and saved as a CSV file that may be imported into spreadsheet software for data analysis. 3.
