Installation Instructions

1. Installation

1.1 Step 1: Bed Mode Configuration

Install 2 Duracell Coppertop alkaline D cell batteries into the Bed Beacon. The Bed Beacon needs to be

configured to bed mode before installing the Bed Beacon onto the bed. To verify the Beacon’s mode, hold

both range buttons down. Immediately, the Beacon’s LED will alternate four (4) times between green and

red flashes. With each flash, there will be an audio alert. Two (2) seconds later, the Bed Beacon should

flash green and beep once. The green flash and audio alert confirms that the Beacon is set for bed mode. If