Installation Instructions

18
Figure 20. Active Bed Beacon List
• Device Information (see Figure 21)
The Bed Beacon device information is optional. The device information can be found on the product
label. An example from the product label can be located on the same page (see Figure 21)
• Bed Type: example – “Hill Rom/VersaCare” (optional metadata). The bed manufacturer and model
information can assist staff in identifying a bed
• Bed Number: example – “001” (required metadata). The installer can choose to place a numbered label at
the bed’s footboard frame to easily identify beds since the Bed Beacon label may not be in a convenient
location to easily view.
• Bed Serial Number: example – “123456” (optional metadata). The bed serial number information can
assist staff in identifying a bed.
• State:
o Active- Device is currently active within the System.
o Inactive- Device will be removed from any reports.
o RMA- Repair
Figure 21. Bed Beacon Metadata
7.2 Replacing an Existing Bed Beacon – Swapping Metadata
Remove the Bed Beacon and read the address from the product label. Select the “Replace Device” function
under system menu (see Figure 22). The replacement tab will open as shown in Figure 23. Enter or scan via
bar code reader the old Bed Beacon’s address into the first box labeled “old device address”. Next, enter or
scan via bar code reader the new Bed Beacon’s address into the second box labeled “new device address”.
Finally, click the “submit button” to complete replacing the existing Bed Beacon.
1E000767