SDS

SAFETY DATA SHEET
MOLD & MILDEW STAIN REMOVER
913378-05 3 / 8
water. For large spills, dike spilled material or otherwise contain
material to ensure runoff does not reach a waterway.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Do not get in eyes, on skin, or on clothing. Wash hands thoroughly
after handling. Mixing this product with acid or ammonia releases
chlorine gas. In case of mechanical malfunction, or if in contact with
unknown dilution of product, wear full Personal Protective Equipment
(PPE).
Conditions for safe storage
:
Do not store near acids. Keep out of reach of children. Store in
suitable labeled containers.
Storage temperature
:
-5 °C to 30 °C
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components
CAS-No.
Form of
exposure
Permissible
concentration
Basis
sodium hypochlorite
7681-52-9
STEL
2 mg/m3
US WEEL
Engineering measures
:
Effective exhaust ventilation system. Maintain air concentrations
below occupational exposure standards.
Personal protective equipment
Eye protection
:
No special protective equipment required.
Hand protection
:
No special protective equipment required.
Skin protection
:
No special protective equipment required.
Respiratory protection
:
No personal respiratory protective equipment normally required.
Hygiene measures
:
Handle in accordance with good industrial hygiene and safety
practice. Wash face, hands and any exposed skin thoroughly after
handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
:
liquid
Color
:
clear, light yellow
Odor
:
Chlorine
pH
:
12.0 - 12.8, (100 %)
Flash point
:
Not applicable, Does not sustain combustion.
Odor Threshold
:
No data available
Melting point/freezing point
:
No data available
Initial boiling point and
boiling range
:
100 °C