Replacement Part List

1. Place the generator on a level plane.

Turn the maintain cover knob to and take off the maintenance cover.

3. Unscrew the lid and oil dipstick.

4. Inject the specified amount of recommended engine oil, and screw

the lid and oil dipstick closed tightly. Reinstall the maintenance cover

and turn the knob to Closed.

Recommended engine oil: SAE SJ 10W-40

Grade of recommended engine oil: API Grade SJ or higher

Oil capacity: 0.1 gal. / 0.38 L

Rechargeable Battery Connection

The generator cannot be started by the Electric Start switch unless

connected to the internal battery.

Turn the maintain cover knob to

, take off the maintenance cover

and connect the positive and the negative wires of the battery

respectively.

Refilling the engine oil

Open the LPG cylinder valve, and use soapy water to soak all the connections on the LPG hose to check

for leaks. If bubbles appear or bubbles grow, then this indicates a leak in the LPG hose. If the leak is at a

fitting, then turn off the valve on the cylinder and tighten the fitting. Open the valve again and use

soapy water to recheck the fitting, then turn off the valve on the cylinder and tighten the fitting. If the

leak continues, or if the leak is not at the fitting, then stop using the generator and contact customer

support.

Take off the fuel cap and check the fuel level. Inject more fuel into the tank if the fuel level is too low.

Checking Before Use

Please check the following components carefully each time before using the generator.

Warning

Connecting the positive

and negative wires

b) Check the LPG

(when using LPG)

a) Check the fuel level(when using gasoline)