Product Manual

10
Power A Free Life
Solar Panel Connection
How to recharge the RIVER 600 using solar panels?
e.g.1
e.g.2 (Only supports parallel connection, not serial connection)
RIVER 600 Charging Port
RIVER 600 Charging Port
XT60 Connector
XT60 Connector
RIVER 600
SOLAR PANEL-21.6V X2
MC4 Connector
SOLAR PANEL-21.6V
Solar MC4 parallel connection cable
* Users need to buy the solar panels and related
parallel connection
accessories on their own.
RIVER 600
If you need to know more about the connection of solar panel, please refer to the Solar Panel User Guide. Here
we focus on demonstrate how one or two solar panel in parallel. The RIVER 600 can support a 10-25V DC in
-
put. When the input exceeds 25V, the RIVER 600's overvoltage protection will be triggered. Over voltage may
damage the product. Users should follow these instructions. EcoFlow do not provide free repair services for any
product damage caused by connecting many solar panels to the product or incorrect connection, even during
the warranty period.
Users can connect a solar panel (do not connect more than one in series) as shown in Example 1. Connect to
EF MC4 to XT60 solar charge cable. Connect the XT60 connector to the RIVER 600’s XT60 input to charge the
device. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in Example 2. If you
want to connect 2 pieces of solar panels, connect them with our solar MC4 parallel connection cable. Connect
the XT60 connector to the RIVER 600’s XT60 input to charge the device. The parallel connection cable is an op
-
tional accessory that is purchased separately.
1. Recommend Charging Method