ECOFLOW RIVER 2 User Manual V1.
Disclaimer Read this user manual carefully before using the product to ensure that you completely understand the product and can correctly use it. After reading this user manual, keep it properly for future reference. Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss. Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document.
Content Specifications 1 Safety Instructions 2 EcoFlow App 3 What's in the Box 3 Product Details 4 Overview 4 LCD Screen 5 Power On/Off 6 Charge Your Devices 6 Charge RIVER 2 7 AC Charging (Grid Charging) 7 Solar Charging 7 Car Charging 8 USB-C Charging 8 Additional Features 9 X-Boost 9 EPS 9 Troubleshooting 10 FAQ 11 Care and Maintenance 11
Specifications General Information Weight Approximately 3.5kg (7.8lbs) Dimensions 245 x 215 x 145mm (9.6 x 8.5 x 5.7inches) Capacity 256Wh (20Ah 12.8V ) Wi-Fi (2.4G) Frequency range: 20M: 2412-2472MHz/40M: 2422-2462MHz Maximum output power: 16.54dBm Bluetooth Frequency range: 2402-2480MHz Maximum output power: 4.
Safety Instructions WARNING – When using this product, the following precautions should be adhered to: Usage 1. Do not use the product near a heat source, such as a fire source or a heating furnace. 2. When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work. 3.
not have to be continuously monitored by professionals. Please follow your doctor's instructions and consult with the manufacturer for restrictions on the use of the equipment. If it is used for general medical equipment, please be sure to monitor the power status to ensure that the power does not run out. 19.
Grounding Instructions 1. This product must be grounded. If it should malfunction or break down while charging, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a power cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes ordinances. 2.
Product Details Overview ❻ ❺ ❼ ❽ ❹ ❸ ❷❶ 1. USB-C input/output port 2. Main power button 3. USB-A output port (×2) 4. DC output switch 5. DC output socket 6. LCD screen 7. AC output socket 8. AC output switch 9 ❾ 9. X-Stream AC charging input port 11. Car/Solar charging input port 5 10 ➓ ⓫ 10.
LCD Screen ❶ ❽ ❷ ❾ ❸ ➓ ❹ ❺ ⓫ ❻ ❼ ⓬ 1. Remaining battery percentage 7. Fan 2. Discharge/Recharge level limitation 8. High temperature warning 3. Remaining charge/discharge time 9. Input power 4. Bluetooth connection 10. Output power 5. Wi-Fi connection 11. Low temperature warning 6. AC output 12. Overload warning Refer to "Troubleshooting" for details.
Power On/Off Press the main power button once to turn on the product. The LCD screen lights up and the main power indicator flashes white. Press and hold the main power button (for about 3 seconds) to turn off the product, and the LCD screen. Short press for power-on/ Long press for power-off 1. After the product is turned on, press the main power button once to turn off the LCD screen. 2. If the product is not used for 5 minutes, it will enter hibernation and the LCD screen will turn off. 3.
Charge RIVER 2 AC Charging (Grid Charging) X-Stream fast charging 360W Max Fully charged in 1 hour AC charging cable 1. For AC charging, we recommend that you use a power socket with a capacity of more than 10A and ensure that the working current of the socket is constantly greater than 10A. 2. For AC charging, please use the AC charging cable included in the package and plug the cable directly into a wall outlet instead of an extension socket.
Car Charging You can recharge the product through the car power outlet. The product supports 12V/24V car chargers and a maximum charging current of 8A. To avoid failure to start due to insufficient car battery, use the car charger after the vehicle is started. In addition, please make sure that the car charger cable is securely connected to the cigarette lighter. EcoFlow takes no responsibilities for any loss or damage caused by failure to follow instructions.
Additional Features X-Boost The product supports X-Boost. It can power devices rated at up to 600W without incurring operation failure due to overload protection. Observe the following tips when using the X-Boost feature: 1. The X-Boost feature is not suitable for appliances with voltage protection (such as precise instruments). 2. It is suitable for heating and motor-driven devices. Please conduct your own tests to check whether your devices support X-Boost.
Troubleshooting Indicator Problem Solution Flashing Battery discharge low temperature Normal operation will resume automatically when the battery warms up. Flashing Battery discharge high temperature Normal operation will resume automatically after the battery cools down. Flashing Battery charging low temperature Normal operation will resume automatically after the battery temperature is restored to above 3°C.
FAQ 1. What battery does the product use? High-quality LFP battery. 2. What devices can the product's AC output socket power? The rated power of the product is 300W and the peak power is 600W. With the X-Boost feature, the product's AC output sockets can power devices rated at 600W or below. We recommend that you confirm the power of devices before use, and ensure that the sum power of all loaded devices is less than the rated power. 3.
