Use and Care Manual

BMShigh-tempnotice
LED2blinks
BMSlow-tempnotice
LED3blinks
Upgradefirmwarestatus
LED2andLED3blinkalternately
Heatingabnormalityduringcharging
LED4blinksforabout10seconds
Heatingabnormalityduringdischarging
LED5blinksforabout10seconds
ChargeYourAppliances
AC/DCOutput 
PresstheDCpowerbuttonorACpowerbuttontoenableACoutputportsandDCoutputports,
andpressagaintodisablethem.
•
Ensurethattheproductisturnedon(check"PowerOn/Off"fordetails)before
enablingDC/ACoutput.
•
Ensurethatthetotalpowerofallloadsislessthantheratedpowerofthe
product.
•
After12hoursofnoloadfortheACoutputports,theACpowerbuttonwillturn
offautomatically.