Use and Care Manual

12
1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass
mode).
2. X-Boost is enabled by default, you can adjust it in the EcoFlow App.
3. X-Boost is not available for all electrical appliances; it’s incompatible with appliances with
strict voltage requirements. Appliances with voltage protection (such as precise instruments)
are not supported. X-Boost mode is more suitable for heating devices. Please conduct your
own tests with your devices with X-Boost enabled.
The product supports EPS. When you connect the grid power to the AC Input Port of the
product through an AC cable, you can power electrical devices through the AC Output Port
(AC power will come from the grid and not the power station in this situation). In case of a
sudden blackout, the product can automatically switch to the battery powered supply mode
within 30ms.
X-Boost and EPS
X-Boost
EPS (Emergency Power Supply)
To avoid operation failure due to overload protection, the X-Boost feature will be
automatically enabled when the total output exceeds the rated output power, which enables
the product to power high wattage appliances at the rated output power.
Bypass mode: When the product is plugged into the power socket for recharging and
connected to other devices at the same time, it cannot provide power to the devices if
the AC power button is turned on, instead, the devices are powered by the grid.
As a basic UPS function, this function does not support 0ms switching. Please do not
connect the product to any device that requires 0ms UPS, such as data servers and
workstations. Please test and confirm the compatibility before using the product. We
recommend that you only charge one device at a time and avoid using multiple ones at
the same time to avoid overload protection. EcoFlow takes no responsibilities for any
device failures or data losses caused by failures to follow instructions.