SDS
- Page 5 of 9 -
Report No.: MTi220105017-02B3
Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com
Add: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao 'an District, Shenzhen, Guangdong,
China.
Personal Precautions, protective
equipment, and emergency
procedures
Restrict access to area until completion of clean-up. Do not touch
the spilled material. Wear adequate personal protective equipment
as indicated in Section 8.
Environmental Precautions Prevent material from contaminating soil and from entering sewers
or waterways.
Methods and materials for
Containment
Stop the leak if safe to do so. Contain the spilled liquid with dry
sand or earth. Clean up spills immediately.
Methods and materials for cleaning
up
Absorb spilled material with an inert absorbent (dry sand or earth).
Scoop contaminated absorbent into an acceptable waste container.
Collect all contaminated absorbent and dispose of according to
directions in Section 13. Scrub the area with detergent and water;
collect all contaminated wash water for proper disposal.
Section 7 – Handling and Storage
Handling Don’t handling Battery with metalwork. Do not open, dissemble,
crush or burn battery. Ensure good ventilation/ exhaustion at the
workplace
Prevent formation of dust.
Information about protection against explosions and fires: Keep
ignition sources away-Do not smoke.
Storage If the Battery are subject to storage for such a long term as more
than 6 months, it is recommended to Battery periodically.
Storage Temperature: -20℃~+40℃, 75%RH Max
Do not storage Battery haphazardly in a box or drawer where they
may short-circuit each other or be short-circuited by other metal
objects.
Keep out of reach of children.
Do not expose Battery to heat or fire. Avoid storage in direct
sunlight.
Do not store together with oxidizing and acidic materials.
Section 8 – Exposure Controls and Personal Protection
Engineering Controls Use local exhaust ventilation or other engineering controls to
control sources of dust, mist, fumes and vapor.
Keep away from heat and open flame. Store in a cool, dry place.
Personal Protective Equipment
Respiratory Protection: Not necessary under normal conditions.
Skin and body Protection: Not necessary under normal