User Manual

Step 1. Press the reset

button for 3 times.

Step 2. The indicator will

start blinking purple and

stays solid for 10s when the

device is removed, timeout

3mins.

3) Remove

Step 2. The indicator will

start blinking green and

stays solid for 10s when

pairing succeeds, timeout

15mins.

4) TouchLink

Method 1. From your Zigbee hub interface, choose to delete or reset the device as instructed.

Method 2. Remove from the Device, see below instructions.

Step 3. Bring the remote

within 10cm of the smart

dimmer and set the remote

into TouchLink

commissioning.

Step 5. The light will

blink 10 times when

touchlink succeeds

Step 1. Press the reset

button for 4 times.