User's Manual

Quick Save Temperature Limits
In Quick Save mode, your system will automatically increase
(in cool mode) or decrease (in heat mode) the set temperature.
Use this option to program the maximum temperature change al-
lowed so your comfort is not compromised. The number you enter
is the dierence from the set temperature of the system before the
Quick Save feature is activated.
Setting up Reminders
Your Smart Thermostat can be programmed to remind you of
required lter changes and regular maintenance.
These reminders were congured by the technician dur-
ing installation. Changing them may eect the opera-
tion of your heating and cooling system.
Note: If you are not sure about what equipment you have
installed or whether you need to replace rather than
clean your lters, please contact your heating and cooling
technician, or consult your original heating and cooling
equipment manuals for the recommended maintenance
procedures.
Maintenance
The Maintenance alert is generated when regularly
scheduled maintenance is required. This alert, along
with your technician’s contact information (if pro-
grammed by the technician during installation), will be
displayed on the touch screen.
Select this item to turn the reminder on or o, show the
date of the last service, and select a reminder interval
between one and 24 months.
Furnace Air lter
Sets the reminder period for cleaning or
replacing the furnace air lter.
Select this item to turn the reminder on or o,
and to set the reminder interval in hours or
calendar months. You can also check the date
of the last lter change.
Humidity Filter (Optional)
Sets the reminder period for cleaning or changing the humidier lter.
Note: If your Smart Thermostat is not connected to a humidier, this
option will not be displayed.
Select this item to turn the reminder on or o, and to select the
reminder interval in hours or calendar months. You can also check the
date of the last lter change.
Ventilator Filter (Optional)
Sets the reminder period for cleaning or changing the ventilator lter.
Note: If your Smart Thermostat is not connected to a ventilator, this
option will not be displayed.
Select this item to turn the reminder on or o, and to set the reminder
interval in hours or calendar months. You can also check the date of the
last lter change.
Temperature Alerts
The Smart Thermostat can generate alerts when the temperature
in the home reaches a pre-programmed temperature. This protects
your home from damage due to freezing or excessive heat.
If this alert has been set up, you will see the alert on the thermostat.
If you’ve congured your personal web portal, you’ll also get an
alert e-mail.
Low Temperature Alert
Select this item to set the temperature at which the Smart Ther-
mostat will generate a Low Temperature alert. The range can be
adjusted to:
O – no alert will be generated
Set temperature range of 40 – 60°F (4.5 – 15.5°C)
High Temperature Alert
Select this item to set the temperature at which the Smart Ther-
mostat will generate a High Temperature alert. The range can be
adjusted to:
Off – no alert will be generated
Set temperature range of 90 – 100°F (32 – 35°C).
To set up Reminders:
From the Home
Screen, press More.
Press Settings.
Select Reminders.
Scroll through options
to set and adjust to
your needs.
13 | 14