User's Manual

The Smart Thermostat uses touch screen tech-
nology that makes navigation easy. Apply light
pressure with your nger to the icons, buttons
and lists or drag you nger across the screen to
slide a slider or scroll through a list.
Note: To prevent damage to the touch screen, never use a
sharp object such as a pen, to press the icons, buttons and
lists.
When the screen shows a list of items, an arrow to the
right indicates more than two options to choose from.
Touching this type of list will bring you to a new list or
screen. If there are only two options for a given list entry,
those options will be displayed next to a switch within the
list. Pressing anywhere on the item will toggle from one
option to the other.
In the various screens on the thermostat, you have three
ways to navigate.
Press Cancel to go back to the previous screen
without saving changes.
Press Done to save changes and move to the next screen.
At any time press the ecobee button (found at the right-
hand side of the unit). This cancels any action and takes
you back to the home screen.
What’s on the Home Screen?
The Home Screen displays the current temperature in your home,
various heating and cooling settings, and icons for navigating to
other features and settings of the thermostat.
The Home Screen is the default display on your Smart Thermostat
USING THE
TOUCH SCREEN
Set temperature
The set temperature is the temperature the system is programmed
to maintain. You can adjust it manually, but for maximum savings
you should automate the temperature setting by programming the
thermostat. See Programming Your Smart Thermostat on page15.
Set Temperature Adjustment Slider
Using your nger, drag the slider back and forth to manually lower
or raise your set temperature. Tapping at either end of the tempera-
ture scale will move the slider by 1°F (0.5°C). When you manually ad-
just the set temperature you will put the system into a Hold mode.
See Holding Action on page 12.
Current Temperature
This is the temperature in the room where the Smart Thermostat is
installed. The thermostat sends signals to your heating and cooling
system to make sure this temperature matches the set temperature
on the thermostat. You can set the Smart Thermostat in Celsius or
Fahrenheit.
System and Fan Settings
Displays the mode your heating and cooling system is currently
running in, as well as the furnace fan setting. Press Details to adjust
these settings.
Wi Signal strength indicator
Indicates the strength of the signal the Smart Thermostat is receiv-
ing from your Wi router. You must have Wi enabled for the indica-
tor to work.
Current Date and Time
Displays the current date and time for your time zone.
3 | 4
1
2
3
4
56
 
1.
2.
3.
4.
5.
6.