Air Monitor MATE
Fan Speed Timer Touch Button Description-I Fan Speed Short Touch: Manual Speed 1 > Manual Speed 2 > Manual Speed 3 > Automatic Control Long Touch: Stop When switching to manual speed, the timer will be set to 30 minutes by default. After 30 minutes, the controller will switch to automatic mode. Timer In manual mode, each press on the button corresponds to 1hr increment. Once the time exceeds 6hr, the decide would be in always on mode, and the device would display 24hr.
Main Page Switch Button Touch Button Description-II Setting Button Sub Pages Switch Button Main Page Switch Button There are 5 main pages. Press this button to switch main page sequentially. Default Main Page > Sensor Page > Ventilation Equipment Page > Settings > About Sub Page Switch Button Setting Button Press the button to display detailed information related to the Main page. In the settings page, press the button to switch and configure options.
Phoneix Connectors Coin Battery for clock Temperature & Humidity Sensor Stand Phoneix Connectors Normal Open AO A+ B- A+ B- 1 Power 2 ※ NO1-NO3 can be used for controlling fan speed in order. Only one of NO1-NO3 can be switched on at a time. ※ NO4 can be used to turn on a relay switch for further controlling a dehumidifier, compressor, or valve.
Switch for touch lock Dip switch RS485 120ohm USB Type C Power Connnector Screw hole for Wall Mount Plate MODBUS ID: A0-AF LORA Version ON: Turn on LORA communication and turn off RS485 slave function.
Wi-Fi Green LED Wi-Fi Red LED Wi-Fi Reset Ambient Light Sensor Description of Wi-Fi LED Light Wi-Fi Status Red Green Waiting for provisioning ON OFF Connecting to access point OFF Slow flashing Connecting to cloud server OFF Fast flashing Connected to cloud server OFF ON Communication Error to Sensor Slow flashing Slow flashing ※ Wi-Fi Reset: Long press reset button to switch Wi-Fi to provision waiting mode.
Air Monitor Pro Air Monitor Pro INDOOR INDOOR Ventilator/Purifier IAQ IAQ IAQ 2021/03/09 16:34:11 58 Dry contact 2 AUTO OFF Automatic Mode Schedule Sun Mon Tue Wed Thu Fri Sat AMM012 Air Quality: Moderate RS485 1 AUTO 1 AUTO Filter in good condition The Filter needs to be replaced OVERVIEW ANALYSIS CONTROL SETTING Set up cloud connection and connect to ventilation equipment ※ Launch Acer Air Monitor Pro APP ※ Click "+" to add Acer AMM Smart Environmental Monitor and Controller.
Ventilator/Purifier OFF Ventilator/Purifier 啟動設備 ON Sun Automatic Mode Automatic Mode Schedule Sun Mon Tue Wed Thu Fri Sat Schedule Sun Mon Tue Wed Thu Fri Sat Mon Tue Wed Thu Fri 01:00 02:00 03:00 04:00 Schedule 05:00 預約設備啟動時間 06:00 Automatic rule setting 07:00 AMM自動規則設定 08:00 09:00 10:00 ＭODE TIMER A OVERVIEW ANALYSIS CONTROL SETTING OFF CONTROL Apply SETTING CONTROL SETTING Schedule setting ※ Click a AMM device, click Control, then click "Ventilator/Purifier".
Air Monitor Pro 智慧空氣品質偵測器 Air Monitor Pro Air Monitor Pro INDOOR Device Center App Settings Map View Account 58 Air Monitor Pro RSSI: -93dB 尚未配對 Scan Bluetooth air quality broadcasts About this app illum 5 PM10 7 Temp. 28 PM2.5 15 Himi. 65 CO2 830 58 智慧空氣品質偵測器 請輸入認證號碼 信號強度: -93dB 此號碼會顯示在AMM面板 2021-03-09 16:34:11 2021-03-09 16:34:11 TVOC 0.23 HCHO 0.01 照度 尚未配對 溫度 5 PM10 7 28 PM2.5 15 濕度 65 二氧化碳 3000 揮發物質 0.23 甲醛 0.
Air Monitor Pro Air Monitor Pro IAQ IAQ 2021/03/09 16:34:11 58 成功連線 後方WiF i燈號為綠燈 Dry contact 2 AUTO 裝置名稱 AMM012 Air Quality: Moderate RS485 1 AUTO 1 AUTO Filter in good condition The Filter needs to be replaced A MM0 10 LORA Configuration ※ Please login the cloud account into LoRa Master device for setting the connection. ※ Once the setting is completed, you can use the APP to access the AMM. Please contact business window for LORA relative functions.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Category Power Item Specification USB Type C Power Input DC 5V 2A DC-in Power Input DC 9-24V 2A DC-Out Power Output DC 5V RTC Backup Battery CR1220 3V Coin Battery Display TFT LCD 320x240 16bit color display Touch Button 5 x Capacitive Touch Button Air Quality Light Full color breathing light Green: Good；Yellow: Moderate； Orange: Unhealthy for Sensitive Group Red: Unhealthy；Purple: Very Unhealthy CO2 Method: NDIR (Non-Dispersion Infrared) Range: 0-10,000ppm Resolution: 1ppm Temperature
Category Sensor Communication Storage Control Item Specification Formaldehyde Sensor Method: Electrochemical Sensor Range: 0-1.600ppm Total Volatile Organic Compound Sensor Method: Semiconductor Range: 0-10ppm Resolution: 0.1°C Ambient Light Sensor Method: Dual Diode Semiconductor Range: 0-10,000Lux Resolution: 1Lux Wireless Network 2.4GHz, IEEE802.11 b, g, n Low Power Bluetooth BLE 2.
1 Lock the barb rack to the back cover with salad head screws. 2 Lock the wall mount plate on the double box with self-tapping screws. ※ Self-tapping screws are placed in the gecko screw group. 3 Align the barb hanger with the rectangular hole on the wall mount. Past down fixed and lock with hexagon socket screws.
※ This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. ※ Keep new and used batteries away from children. ※ If the battery compartment does not close securely, stop using the product and keep it away from children. ※ If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
© 2021 Acer Inc. All Rights Reserved.
