User Manual

-Setup the panels array
The hybrid inverter requires 24V input from the solar panels array. So
the 10 panels should be wired into a 24V array.
Wiring method:
1.Connect every 2 panels in series to make a 24V string
Each ECO-WORTHY Solar Panel has a pair of MC4 solar cable at the
back of panel that consists of male and female connectors. This type of
connector uses a “snap-in” type of safety locking clips to lock the two
mating connectors, making it easy to install.
For series connections, just plug one panel’s male and the other’s
female MC4 connectors together.
-10-