MSDS

Page 1 of 3
Material Safety Data Sheet
Issue Date: 3/2011 Revision Date: 3/2011 Revision Number: 0
Material Name: Eco>Absorb™
Section 1 – Chemical Product and Company Identification
Product Name: Eco>Absorb™
Manufacturer: Eco-Absorbent Technologies, Inc.
1190 N. Del Rio Place
Ontario, CA 91764
Emergency Phone: [phone] Fax: [phone]
CAS#: 93763-70-3
Formulation: Amorphous sodium potassium aluminum silicate of various grades and other proprietary all-natural inert
ingredients.
Chemical Name: Amorphous sodium potassium aluminum silicate
Hazard Labeling: None Required
Section 2 – Composition / Information on Ingredients
OSHA PEL: 5 mg/m
3
respirable - 15 mg/m3 total NIOSH REL: 5 mg/m
3
ACGIH TLV: 10 mg/m
3
Crystalline Silica quartz less than <0.10% CAS#: 14808-60-7
Section 3 – Hazards Identification
Health Effects
Acute Health Effects: None
Absorption: Not Applicable
Eyes: Irritation and inflammation
Inhalation: Users sensitive to inert dust may experience coughing and/or irritation in upper respiratory system if heavy
concentrations of airborne material are present.
Ingestion: Non-Toxic. May cause slight discomfort but is generally regarded as safe by the FDA.
Skin: Not Applicable
Target Organs: Lungs, Eyes
Primary Routes of Entry: Inhalation
Medical Conditions Aggravated by Exposure: Pre-existing upper respiratory diseases such as asthma, bronchitis, and
emphysema.
Section 4 – First Aid Measures
Eyes: Rinse thoroughly with clean water or eye wash solution. Avoid rubbing eyes.
Inhalation: Move to a well ventilated area until coughing subsides and breathing returns to normal.
Ingestion: Not-Applicable
Section 5 – Fire Fighting Measures
General Fire Hazard: Not a Fire Hazard Flash Point: Non-flammable
Auto Ignition: Will Not Occur Melting Point: >2000 °F (>1093 °C)
Fire Fighting Equipment/Instructions: None needed if product is unused. If used to absorb a flammable liquid refer to the
MSDS sheet for the material absorbed.