Operation Manual

ENGLISH
Instruction manual MECHANIKA · MECHANIKA PROFI
26
Follow the steps as indicated below:
1
Brewing group in the beginning.
2
Use a flat screwdriver to lever out the
net filter and the group gasket.
3
The net filter and the gasket are now
nearly removed.
4
Remove the net filter and the gasket
completely.
5
Keep the new spare parts ready at
hand (the chamfered side of the
group gasket with ECM print faced
upwards to the brewing group).
6
Clean the group with a brush.
Lock the net filter firmly into the
gasket.
7
Insert the net filter into the gasket.
8
Take the filter holder without filter.
9
Clamp the filter holder to the group.
10
Therefore, move the filter holder
until the net filter is locked firmly
into the gasket.
11
Now you can easily lock the filter
holder into place.
12
The group is ready for use.
The machine can be used again, as described at page 21 of the instruction manual.