Operation Manual

ENGLISH
Instruction manual ELEKTRONIKA PROFI
27
1
Brewing group in the beginning.
2
Use a flat screwdriver to lever out the net
filter and the group gasket.
3
The net filter and the gasket are now
nearly removed.
4
Remove the net filter and the gasket
completely.
5
Keep the new spare parts ready at hand
(the chamfered side of the group faced
upwards to the brewing group).
6
Clean the group with a brush.
Lock the net filter firmly into the gasket.
7
Insert the net filter into the gasket.
8
Take the filter holder without filter.
9
Clamp the filter holder to the group.
10
Therefore, move the filter holder until the
net filter is locked firmly into the
gasket.
11
Now you can easily lock the filter holder
into place.
12
The group is ready for use.
The machine can be used again, as described at page 23 of the instruction manual.
The steam nozzle is blocked
Clean the slots of the steam nozzle carefully with a needle or with a paper clip.