Operation Manual

ENGLISH

3 MACHINE DESCRIPTION

3.1 Machine parts

Barista A2

1 Cup heating tray

2 Water level indicator boiler

3 Boiler / pump pressure gauge

4 Control panel

5 Hot water dispenser

6 Steam lever valve with steam wand left

7 Drip tray (drip-grids, not pictured)

8 Brew groups

9 On / Off switch 0/1/2

0= Off/ 1=Pump/ 2=Pump + Heater

10 Steam lever valve with steam wand right

Caution!

Danger of injury: The following parts are hot or may become hot:

• area around the steam and hot water wands

• steam and hot water wands

• porta filter

• brew groups

• body (upper part and side frames)

3.2 Control panel

All lamps are illuminated when the machine is operational. After having pressed a button, only that respective lamp

will be illuminated.

Automatic programming of doses and quantity

of cups:

1 Programming button / manual

2 Single espresso

3 1 large cup

4 Double espresso

5 2 large cups

6 Hot water

3.3 Technical data

Barista A2

Voltages: 2 phases, 230 V each (different voltages available upon request)

Power: 4.000 W

Water tank: 14.0 L

Measurements: W x D x H / 730 mm x 537 mm x 520 mm

Barista A3

Voltages: 2 phases, 230 V each (different voltages available upon request)

Power: 5.000 W

Water tank: 21.0 L

Measurements: W x D x H / 940 mm x 537 mm x 520 mm