Owner`s manual

How to operate the Sound Adjustment Mode

The frequencies for the front and rear speaker high-pass filter

(HPF) and woofer low-pass filter (LPF) can be set within a

range of 63 to 200 Hz. (This is the same as the HPF and LPF

cutoff frequencies.)

Turn the [SEL] button to select X-Over.

The selected item will be highlighted.

Press the [SEL] button.

The mode will change to crossover setting mode.

Turn the [SEL] button to select the cut-off frequency.

When the button is turned, the frequency changes in the

following order.

63Hz ↔ 80Hz ↔ 100Hz ↔ 125Hz ↔ 160Hz ↔ 200Hz ↔

Press the [SEEK /FAST ] buttons to set the slope.

[SEEK ] button: PASS

[FAST ] button: 12dB/oct

Press the [RTN] button.

At this time, other adjustments can also be made in normal

mode.

Press the [SOUND] button for less than one second to

exit sound adjustment mode.

CROSSOVER ADJUSTMENT (X-Over)

[SOUND] button

[SEL]

button

[SEEK ] button

[FAST ] button

[RTN] button

ATTENTION

If no woofer has been connected, set the slope adjustment to

"PASS". (If you set the slope to 12 dB/oct, the bass sound will not

be output from the speakers.