Owner's Manual

Operation
bId ATTENTION
If you do not want to cancel the connection,
press the [RTN/BAND] button. The BT Audio
Set selection mode
is activated again.
4
When the disconnection has been
completed, the "COMPLETED"
message appears on the display.
The main unit is now disconnected
from the portable device.
(:I and J' disappear from the display.
However, :I will not disappear while
Blutooth hands-free is connected.)
Displaying device information for
the main unit
The name of the device (main unit), the
passcode and the
BD ADD (device address)
can be displayed.
Press the [SELECT] (Up/Down)
button while in the 8T Audio Set
selection mode to select Device
INFO.
II Press the [ENTER] button.
The name of the device and the
passcode are displayed.
bId ATTENTION
Each time the [SCREENITEXT] button is
pressed, the display changes
in the following
way.
Device name / passcode ~ Device name / BD
ADD (device address)
II Press the [RTN/BAND] button.
The BT Audio Set selection mode is
activated again.
40