Owner's Manual
Table Of Contents
- Reference Guide
- Owners Manual (Downloaded from Eclipse Web Site, Not Supplied with Product)
- Reset
- Clock Set
- Demo Mode On / Off
- Removing / Attaching the Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- CD / MP3 / WMA Operation
- USB Music File Player Operation
- Bluetooth Audio Operation
- Bluetooth Hands-Free Function
- Tuner Operation
- Using the Remote Control
- ESN Security
- Adjusting Audio Settings
- Display Adjustments
- Function Menu
- CD Chaner Control
- HD Radio Tuner Control
- XM Satellite Radio Tuner Control
- Sirius Satellite Radio Tuner Control
- iPod
- AUX Input
- Messages
- Troubleshooting
- Specs
- Installation Manual
- Warranty
II
Press
the
[RTN/BAND) button.
The portable device
is
set as a
Bluetooth audio source.
bJ!J
ATTENTION
• The Bluetooth audio (BT-Audio) function
can only be selected in the audio mode
when the BT Audio Set selection mode is
set to ON.
• The default setting for the Bluetooth audio
mode is OFF (BT-Audio selection is
disabled).
Connecting
the
main
unit
and
the
portable
device
1
Press
the
[SELECT] (Up/Down)
button
while
in
the
BT-Audio Set
selection
mode
to
select
Connect.
B
Press
the
[ENTER)
button.
The "Waiting" message appears
on
the display.
bJ!J
ATTENTION
Press the [RTN/BAND] button to change the
portable device to
be
connected. The BT-
Audio Set selection mode is activated again.
The
Bluetooth
audio
function
4
When
the
connection
has been
completed,
the
"COMPLETED"
message appears
on
the
display.
The portable device is now connected
to the main unit.
(~
and J appear
on
the display.)
If the connection has not been
successfully completed, the "FAILED"
message appears
on
the display.
bJ!J
ATTENTION
• If the portable device is still connected,
disconnect it.
• If the connection has not been successfully
completed, and the "FAILED" message
appears on the display, connect the
portable device again, following the
procedure from the BT Audio Set selection
mode
in
Step
1.
• The passcode is a password used when
connecting the portable device to the main
unit.
• When the audio
of
the cell phone is
connected, hands-free can be connected at
the same time for some devices. If you want
to be able to use the hands-free function,
perform the hands-free connection
procedure again.
Disconnecting
the
main
unit
and
the
portable
device
•
El
lnput
the
passcode
using
the
portable device.
The default setting value of the
passcode is 1234.
Press
the
[SELECT] (Up/Down)
button
while
in the BT
Audio
Set
selection
mode
to
select
Disconnect.
bJ!J
ATTENTION
• For details on how to operate the portable
device, read its instruction manual.
• Be sure to perform the connection
of
the
portable device only while the "Waiting"
message is
on
the display.
BPress
the
[ENTER] button.
The "Disconnect ?" message appears
on the display.
IIPress
the
[ENTER) button.
39