Owner's Manual
Table Of Contents
- Reference Guide
- Owners Manual (Downloaded from Eclipse Web Site, Not Supplied with Product)
- Reset
- Clock Set
- Demo Mode On / Off
- Removing / Attaching the Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- CD / MP3 / WMA Operation
- USB Music File Player Operation
- Bluetooth Audio Operation
- Bluetooth Hands-Free Function
- Tuner Operation
- Using the Remote Control
- ESN Security
- Adjusting Audio Settings
- Display Adjustments
- Function Menu
- CD Chaner Control
- HD Radio Tuner Control
- XM Satellite Radio Tuner Control
- Sirius Satellite Radio Tuner Control
- iPod
- AUX Input
- Messages
- Troubleshooting
- Specs
- Installation Manual
- Warranty
. .
For
your
safety
in
using
the
C07200
mkll
For your safety
in
using the CD7200 mkll
Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the
CD7200 mkll. They show safe and correct ways to handle the product so as to prevent personal injury
to you, others and to avoid property damage.
Before reading through the manual, take time to read through and learn the important information listed
in this section.
This "Warning" sign indicates a situation in which incorrect
&Warning handling or disregard
of
this sign might result in death or
serious personal injury.
This "Caution" sign indicates a situation in which incorrect
& Caution handling
or
disregard
of
this sign might result
in
personal
injury or may result solely in damage to property.
Please read all materials such as manuals and warranties that have come with the product.
Eclipse will not be held liable for unsatisfactory product performance due to failure to follow these
instructions.
~WARNING
• Do
not
modify
this
system
for
use
other
than
that
specified herein. Also,
do
not
deviate
from the installation procedures described herein; Eclipse
will
not
be held liable
for
damages including,
but
not
limited
to
serious injury, death
or
property damage resulting
from
installations
that
enable unintended operation.
• This main
unit
requires 12V
DC
and
should
only
be installed in a vehicle
with
a 12V negative
ground
electrical system.
Any
other
installation may cause a fire
or
other
severe damage
to
the main
unit
and the vehicle.
• Never install
this
main
unit
where
it
will
interfere
with
safe operation
of
the vehicle. Never
block
the
drivers'
view. Do
not
install main
unit
where
it
may interfere
with
operation
of
the
brakes, the steering
or
any
safety equipment,
including
seat belts and
air
bags.
• Before
drilling
holes
in
a vehicle
for
installation,
you
must
confirm
the
locations
of
pipes,
tanks, electrical wiring, and
other
vehicle
systems
and components
to
ensure
that
there
will
be
no
interference
or
contact. In addition,
you
must
also
apply
rust
prevention and leak
prevention measures at the
drilling
area. Otherwise, fire
or
electric
shock
could
occur.
• When installing main
unit
do
not
remove
or
alter existing vehicle fasteners,
including
nuts,
bolts, screws, clips, and fittings. Never detach, move
or
alter existing vehicle wiring,
including
electrical
grounds
and straps. Alteration
of
existing vehicle components may
make vehicle unsafe
to
operate.
• Before installation, remove the negative
(-)
battery terminal
to
prevent shocks, electrical
arcing, fires, and damage
to
vehicle
wiring
and the main
unit
you
are installing.
• Secure
wiring
with
tape
or
plastic ties
so
that
wires
do
not
interfere
with
vehicle operation,
including
brake pedal, gear
shifter
and steering. Position wires
so
that they
will
not
be
rubbed, abraded,
or
damaged
by
moving
vehicle components,
including
power
seats.
•
To
avoid main
unit
and vehicle damage,
including
fire, never
supply
power
to
the installed
main
unit
in a
way
which
will
overload the capacity
of
an existing vehicle circuit. Never
leave a
power
supply
wire
or
connection uninsulated. Always install supplied fuses,
circuit
breakers, and relays.
2