Owner's Manual

• System connection example I
Ejemplo de conexion del sistema I
Exemple de connexion du systeme
English
~ Tip--------------
• Install and connect all of the peripheral units before
connecting them to the main unit.
• Do not remove any of the protective caps (RCA, etc.) unless
the connectors are in use.
• Be sure to wrap the connection wires with tape (PVC tape)
to insulate them.
1) CD7200 mk II or CD3200 + iPC106 + CH3083 + MEI1 00 + Power Amplifer
}
INSULATE EACH WIRE WITH NONE
CONDUCTING TAPE SUCH AS
ELECTRICAL TAPE OR ANOTHER
INSULATING METHOD
}
INSULATE EACH WIRE WITH NONE
CONDUCTING TAPE SUCH AS
ELECTRICAL TAPE OR ANOTHER
INSULATING METHOD
} TO STEERING REMOTE CONTROL
. NO CONNECTION (Do not remove cap)
l'l __ ~...£... 4Il---\ ANTENNA PLUG
13p
f
l6P
~
c;::J
White
Yellow
White/Black
Gray
Gray/Black
Green
Red
Green/Black
Blue
Purple
OrangelWhite
Purple/Black
BluelWhite
Brown
Black
Brown/Black
ND ...
MEI100 : The MEI1 00 cannot be connected to the CD3200.
(sold
se~rateIY)
_\ LSIDE
OIl-'---o-,~_
NO CONNECTION .
(Do not remove cap)
TO ACC (Power Supply)
TO POWER ANTENNA
RELAY (Supply)
TO HEAD LIGHT SWITCH
(Illumination
(+))
TO TURN-ON WIRE
(Amplifiers, etc.)
r
--;:::==::;:;~=l TO BATTERY+12V
(Permanent Supply)
TOGROU
INTERCONNECTING WIRES
TO GROUND (supplied with iPC106)
o 0+ ToiPod
• \. INTERCONNECTING WIRES
IN~ERCONNECTING WIRES (supplied with iPC106)
f :D ':'j (supplied With IPC106) I
,PC106 TO USB DEVICE
i-~~ ~ (sold separately)
"r
9m
~ I~--!...----
TO BATTERY+12V
NO CONNECTION (Permanent Supply)
n :;11":7""~~J
TO GROUND V
INTERCONNECTING
WIRES CH3083
(supplied with CH3083) (sold separately)
~ Tip--------------------_..,
• iPod ® is a trademark of Apple Inc., registered in U.S. and other countries.
• iPod is for legal or right holder-authorized copying only. Don't steal music.