Owner's Manual

Table Of Contents
Other
information
If you have a question:
z
CD7200
mkD
t
SB~
TEXT
15CIlEEN
I
MA-
I
MUTE
I
.-..:~------------~~
llANO
&!MHn
[RESET]
button
Check the items mentioned below before attempting to troubleshoot problems.
~CAUTION
If a problem occurs, for instance when the main unit does not respond to any button presses, or the
display doesn't work correctly, press the [RES
En
button using a paper clip or similar item.
Pressing the [RES
En
button will delete all the entries from memory. The settings will return to
those made at the factory prior to shipment.
Displayed information (for troubleshooting)
The information listed
in
the chart below is displayed to show the status
of
the CD, USB memory, XM
Radio, Sirius Radio, iPod, CD changer
or
Bluetooth, etc. Refer to the chart for details
of
the appropriate
remedial action to be taken.
Information Explanation and remedial action
INFO 1 CD PLAYER SHUTTER IS
OPEN
Close the shutter.
INF02
NO DISC IN THE MAGAZINE There is no disc
in
the magazine or player. Load a disc into
the magazine. (Load a music disc.)
INFO 3 DISC IS DIRTY OR DAMAGED
The loaded disc is dirty or upside down. Check its orientation
and whether it is clean.
INFO 5 CD PLAYER AND CD
CHANGER MECHANICAL
FAILURE IS OCCURRING
The CD player and CD changer are inoperative for some
reason. Go through the magazine removal procedure.
If the magazine fails to eject, have your dealer fix the
problem.
For the CD player. press and hold the
[~
(OPEN/EJECT»
button for more than 5 seconds. If no response, contact
your dealer.
INF06
INTERNAL TEMPERATURE OF
CD PLAYER AND CD
CHANGER IS HIGH (PICKUP
UNIT PROTECTION)
The temperature
in
the CD player and CD changer is too
high for operation. Wait till they cool down.
Resume playback after the "High temperature sensed
and CD stopped" display disappears. If the CD still cannot
be played, have your dealer fix the problem.
110