Owner's Manual
Table Of Contents
- Reference Guide
- Owners Manual (Downloaded from Eclipse Web Site, Not Supplied with Product)
- Reset
- Clock Set
- Demo Mode On / Off
- Removing / Attaching the Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- CD / MP3 / WMA Operation
- USB Music File Player Operation
- Bluetooth Audio Operation
- Bluetooth Hands-Free Function
- Tuner Operation
- Using the Remote Control
- ESN Security
- Adjusting Audio Settings
- Display Adjustments
- Function Menu
- CD Chaner Control
- HD Radio Tuner Control
- XM Satellite Radio Tuner Control
- Sirius Satellite Radio Tuner Control
- iPod
- AUX Input
- Messages
- Troubleshooting
- Specs
- Installation Manual
- Warranty
How to operate the tuner with
an
optional SIRIUS satellite radio tuner connected (U.S.A.lCANADA only)
Category selection
The channel can
be
selected from among
categories such as POP and ROCK.
Consult the SIRIUS website for the details of
the categories.
II
Press the [SELECT] (Up/Down)
button
for
less
than
one
second.
The category will switch
in
the order
shown below each time button is
pressed.
Up:
Advances to the next category.
Down:
Returns to the previous category.
Direct
channel
selection
The channel can be selected by inputting the
channel directly.
II
Press
the
[MODE]
button
for
more
than
one
second.
The mode will change to the direct
channel selection mode.
2
Press
the
[SELECT] (Right/Left)
button
to
select
the channel
number.
Right:
Advances to the next number.
Left:
Returns to the previous number.
I
Press the [SELECT] (Up/Down)
button
to
select the channel
number
to
be
input.
Each time the button is pressed, the
channel number changes
in
the
following order.
O~1~2~3~4~5~6~7~
8~9~O~'"
IIPress
the
[ENTER)
button.
Reception starts.
Manually
storing
channels
into
memory
This section covers the storing of channels
in
the
numbered buttons
in
memory.
1
Press
the
[SELECT] (Right/Left)
button
to
tune
to
the
channel
to
be
stored
in
the
memory.
2
Select any
button,
from
[1]
to
[6],
and press
it
for
more
than
two
seconds.
The tuned channel is now memorized
and stored
in
the button selected.
Repeat the procedure to stored
additional manually tuned channels
into memory,
in
turn, for buttons [1] to
[6]. These buttons are called the
preset buttons.
mATTENTION
If the vehicle's battery is disconnected (for
repairs to the vehicle or when removing the
main unit), all channels stored
in
memory will
be
lost.
In
such cases, store the channels
in
memory again.
Preset channel
scan
This function enables the reception
of
all the •
channels
in
the preset buttons for five seconds
each.
II
Press the [SELECT] (Down)
button
for
more
than
one second.
[P
SCAN] will appear
on
the display,
and channels stored
in
preset buttons
[1] through [6] will be received for five
seconds each.
101