Owner's Manual

4
Press the [SELECT] (Right/Left)
button to select the positions
where characters will be input.
The character will be inserted where
the cursor is flashing.
Right:
Advances the cursor to the right.
Left:
Returns the cursor to the left.
II
Press the [SELECT] (Up/Down)
button to select characters.
Up:
Moves the character forward in its
type.
Down:
Moves the character backward in its
type.
[Symbol] First character [I]
! ~"~# ~ $ ~ % ~ & ~'~ (~
)~*~+~,~-~.~/~:~;~
<~=~>~?~@~'~-~
!~ ...
[Upper-case alphabet characters] Initial
value [A]
A~B~C~"'~X~Y~Z~
A~'"
[Numeric characters] Initial value [1]
1
~2~3~"'~8~9~0~
1 ~ ...
II Press the [ENTER] button to save
iii the title.
~ATTENTION
• To change the type of character to be
entered, repeat steps 3 and
5.
• A maximum of 16 characters may be
entered
per title.
• 30 titles can be stored.
• When the data storage area is fUll, the
"FULL DATA" message appears.
If new data
is input, the older data will be deleted.
Making changes with Function Mode
Deleting a station name/disc title
1
Press the [RTN/BAND] button for
more than two seconds while the
title setting mode is activated.
The station name/disc title that is
displayed at this point will be deleted.
Setting the guide tone
The main unit is set at the factory to emit a beep
tone
in response to button operation. The guide
tone feature may
be disabled in the following
procedure:
I
Press the [SELECT] (Up/Down)
button to select Guide Tone.
EI Press the [ENTER] button.
The guide tone setting mode is
activated.
3
Press the [SELECT] (Up/Down)
button to select Guide Tone ON/
OFF.
Setting clock display (Clock ON/ •
OFF)
Switches the clock display to ON/OFF.
I
Press the [SELECT] (Up/Down)
button to select Clock ON/OFF.
EI Press the [ENTER] button.
The clock display setting mode is
activated.
3
Press the [SELECT] (Up/Down)
button to set the clock display to
ON or OFF.
85