Owner's Manual

Making changes with Display Adjustment Mode
Changing display type
(DISP Type)
You can change the display type (Background or
Spectrum analyzer).
I
Press the [SELECT] (Up/Down)
button to select DISP Type.
II Press the [ENTER] button.
The display type setting mode is
activated.
II
Press the [SELECT] (Up/Down)
button to select a setting item.
When the button is pressedI the
setting item changes in the following
order.
Background ~ S/A ~ Background ~ ...
II Press the [ENTER] button.
Switches among the adjustments
modes.
Changing Background
(Background)
I
Press the [SELECT] (Up/Down)
button to select Background.
II Press the [ENTER] button.
The background setting mode is
activated.
II
Press the [SELECT] (Up/Down)
button to select a setting item.
When the button is pressed, the
background changes in the following
order.
Motion picture1 ~ Motion picture2 ~
Motion picture1 ~ ...
II Press the [ENTER] button.
The selected settings will take effect.
Changing spectrum analyzer
(S/A)
You can change the spectrum analyzer type.
I
Press the [SELECT] (Up/Down)
button to select S/A (Sensitivity).
II Press the [ENTER] button.
The spectrum analyzer type setting
mode is activated.
II
Press the [SELECT] (Up/Down)
button to select a setting item.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 ~ Type 2
II Press the [ENTER] button .
The selected settings will take effect.
81
•