Owner's Manual

Non-Fader Output settings (Output)
I
Press the [SELECT] (Down) button
to select Output.
2
Press the [SELECT] (Right/Left)
button to select Monaural or
Stereo.
Right:
Monaural
Left:
Stereo
Speaker layout settings (SP
Layout)
Depending upon speaker layout, you can switch
between 3-way and 4-speaker systems. (Select a
system configuration before adjusting PEQ. time
alignment or cross over.)
I
Press the [SELECT] (Up/Down)
button to select SP Layout.
I Press the [ENTER] button.
The speaker layout setting mode is
activated.
II
Press the [SELECT] (Up/Down)
button to select 3 WAY or 4 SP+SW.
a
Press the [ENTER] button for more
• than five seconds.
"OK?" will be displayed.
R Press the [ENTER] button for less
iii than one second.
~CAUTION
When SWitching between 3 WAY and 4
SP+SW modes, please make sure that the
volume level
is set to O.
How to operate the Sound Adjustment Mode
Importing Sound Data (Sound
Data)
Sound data adjusted by the E-iSERV website
can be downloaded to a CD-R or a USB memory
and imported into the main unit.
I
Press the [SELECT] (Up/Down)
button to select Sound Data.
I Press the [ENTER] button.
The sound data importing mode is
activated.
3
Press the [SELECT] (Up/Down)
button to select the media type
(Disc or USB).
II Press the [ENTER] button.
• When selecting a CD-R:
The front panel will open automatically.
"INSERT DISC" will be displayed.
• When selecting a USB: •
"CONNECT USB" will be displayed.
R Insert the CD-R or connect the USB
iii memory.
The files are automatically read.
I!!I Press the [SELECT] (Up/Down)
iii button to select a file.
I Press the [ENTER] button.
II
Select a button from [1] to [5], and
: press it for more than two
seconds.
The selected file is written on the
selected button.
The CD-R will be ejected automatically
when writing is complete.
The display will return to the file
selection screen.
77