Owner's Manual

~ATTENTION
• Refer to the following for the method of
calculating the delay time.
A = (B-C)
/34
A:Delay time (ms)
B:Distance from the listening position to the
furthest speaker (cm)
C:Distance from the listening position to the
speaker to
be adjusted (cm)
c
(Example) Listening position:
Driver's seat (left)
B:200 (cm)
C:50 (cm)
Delay time= 200 (cm) - 50 (cm)
/34
= Approx. 4.4 (ms)
II Press the [SELECT] (Up/Down)
iii button to adjust the level.
Up:
Increases the dB.
Down:
Decreases the dB.
Crossover adjustment (X-Over)
Specified frequency bands are allocated to each
speaker for improved sound integration.
I
Press the [SELECT] (Up/Down)
button to select the X-over.
BPress the [ENTER] button.
The crossover setting mode is
activated.
How to operate the Sound Adjustment Mode
II Press the [ENTER] button to set
iii the crossover adjustment channel.
Each time the button is pressed, the
channel changes in the following
order.
4-speaker layout:
Front ~ Rear ~ Woofer ~ Front ~ ...
3-way speaker layout:
HPF ~ Mid-LPF ~ Mid-HPF ~ LPF ~
HPF~'"
I
Press the [SELECT] (Right/Left)
... button to select the cut-off
frequency.
Each time the button is pressed, the
frequency changes in the following
order.
4-speaker layout:
Front/Rear:
63 Hz
B 80 Hz B 100 Hz B 125 Hz B
160 Hz B 200 Hz B 250 Hz B 315 Hz
B 400 Hz B 500 Hz B 630 Hz B
800 Hz B 1kHz B 1.25kHz B 1.6 kHz
B 2 kHz B 2.5 kHz B 3.15 kHz B
4kHz B 5kHz B 6.3 kHz B 8kHz B
10 kHz
Woofer:
20 Hz
B 25 Hz B 31.5 Hz B 40 Hz B
50 Hz B 63 Hz B 80 Hz B 100 Hz B
125 Hz B 160Hz B 200 Hz
3-way speaker layout:
M-LPF/Hi:
200 Hz
B 250 Hz B 315 Hz B 400 Hz
B 500 Hz B 630 Hz B 800 Hz B 1kHz
B 1.25kHz B 1.6 kHz B 2 kHz B 2.5
kHz
B 3.15 kHz B 4kHz B 5kHz B 6.3
kHz
B 8kHz B 10 kHz
M-HPF/Low:
20 Hz
B 25 Hz B 31.5 Hz B 40 Hz B
50 Hz B 63 Hz B 80 Hz B 100 Hz B
125 Hz B 160Hz B 200 Hz
75
•