Owner's Manual
Table Of Contents
- Reference Guide
- Owners Manual (Downloaded from Eclipse Web Site, Not Supplied with Product)
- Reset
- Clock Set
- Demo Mode On / Off
- Removing / Attaching the Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- CD / MP3 / WMA Operation
- USB Music File Player Operation
- Bluetooth Audio Operation
- Bluetooth Hands-Free Function
- Tuner Operation
- Using the Remote Control
- ESN Security
- Adjusting Audio Settings
- Display Adjustments
- Function Menu
- CD Chaner Control
- HD Radio Tuner Control
- XM Satellite Radio Tuner Control
- Sirius Satellite Radio Tuner Control
- iPod
- AUX Input
- Messages
- Troubleshooting
- Specs
- Installation Manual
- Warranty
Various
Settings
Displaying measurement results
and
save to USB memory
Connect the RCA
connector
of
the
optional
microphone
(MEI-100)
to
the L-CH
of
the AUX
jack
of
the
main unit.
Align the microphone with the actual
ear position and attach it to the
headrest or other appropriate fixture.
(Attach the microphone using tape or
string.) Connect the USB memory if
data
is
to
be
saved.
II
Press
button
[6] on the PEQ screen
for
less than one second.
After pressing the button, a 1a-second
countdown begins. Leave the vehicle
during that time.
After ten seconds, pink noise will
be
output from the speakers and the
measurement of the frequency
characteristics will start. The
"Measuring" message appears
on
the
display while measurement
is
in
progress.
When measurement is complete, the
measurement results will appear
on
the display.
You
can adjust the volume
(by turning the [VOL] button) and
restart measurement while
measurement
is
in
progress.
Press the button [6] once more to
cancel measurement.
The measurement result can
be
referred to when adjusting parametric
equalizer.
~ATTENTION
Do
not play music from the USB while
measuring frequency characteristics.
74
Time alignmentadjustment (Time
Alignment)
The delay time and level of the sound from each
speaker
can
be
adjusted
in
order to correct any
phase mismatches
in
the sound resulting from
the listening position. (For details about speaker
layout selection, refer to page 77.)
II
Press the [SELECT] (Up/Down)
button
to
select Time Align.
II
Press the [ENTER] button.
The time alignment setting mode is
activated.
I
Press the [ENTER]
button
to
select
the speaker band
to
be adjusted.
Each time the button is pressed, the
band changes
in
the following order.
4-speaker layout:
FL~
FR~
RL~
RR~SW~
FL~'"
3-way speaker layout:
HL
~
HR
~
ML
~
MR
~
LL
~
LR
~
HL~'"
4
Press the [SELECT] (Right/Left)
button
to
adjust
the
time
delay in
the arrival
of
the sound.
The delay time
can
be
adjusted within
0.0
to
10.0
ms
(0.1
ms for the main
unit).
Right:
Increases the time.
Left:
Decreases the time.