Owner's Manual

Various Settings
How to operate the AUDIO CONTROL
Switching audio control modes
Various audio control modes may be fine-tuned using this procedure. Refer to Speaker Layout Settings
for more information.
II
Press the [ENTER] button for less than one second to select the item to be
adjusted.
Modes will switch
in the order shown below each time the button is pressed.
3-Way Speaker Layout:
BASS
~ MID ~ TREB ~ LOUDNESS ~ SVC*1~ VOL~ BASS ...
4 Speaker + Sub-Woofer Layout:
BALANCE*2~ FADER*2~ NON-F*3~ LOUDNESS*2~ SVC*1~ VOL~ BALANCE*2 ...
*1: Setting cannot be made in FM mode.
*2: Cannot be set when the CSII is set to ON.
*3: NON-F (non-fader) Output is not affected by the settings of the BASS, MID and
TREB.
Rotary Mode
Mode Function
Left
Right
BASS Adjusts bass level.
Decrease level. Increase level.
MID
Adjusts middle level.
Decrease level.
Increase level.
(MIDDLE)
TREB
Adjusts treble level.
Decrease level. Increase level.
(TREBLE)
SVC
Adjusts different volume levels for each audio
(Source Volume
Decrease level. Increase level.
Control)
mode.
FADER
Adjusts the audio balance of the front and rear
Emphasizes rear Emphasizes front
speakers speakers.
speakers.
BALANCE
Adjusts the audio balance of the right and left Emphasizes the left
Emphasizes the
speakers speakers.
right speakers.
NON-F
Decrease the sub- Increase the sub-
(NON-FADER
Adjusts non-fader level (for subwoofer).
woofer level. woofer level.
LEVEL)
The loudness control may be turned on to
LOUDNESS
emphasize low and high frequencies at low
Select OFF Select ON
volume levels.
Loudness boosts bass and treble at low volumes.
64