Owner's Manual

Operation
3
Press the [SELECT] (Up/Down)
button to select Outgoing Calls or
Incoming Calls.
Outgoing Calls:
Outgoing call history
Incoming Calls:
Incoming call history
II Press the [ENTER] button.
If Outgoing Calls is selected
"DELETE?" and "Outgoing Calls" will
be displayed.
If Incoming Calls is selected
"DELETE?" and "Incoming Calls" will
be displayed.
II Press the [ENTER] button.
6
When the data in the call history
has been deleted, "COMPLETED"
will be displayed.
Deleting preset dial
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Delete.
II Press the [ENTER] button.
II
Press the [SELECT] (Up/Down)
button to select Preset Dial.
II Press the [ENTER] button.
"DELETE?" and "Preset Dial" will be
displayed.
II Press the [ENTER] button.
6
When the data in preset dial has
been deleted, "COMPLETED" will
be displayed.
58
Deleting all data
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Delete.
II Press the [ENTER] button.
II
Press the [SELECT] (Up/Down)
button to select ALL.
II Press the [ENTER] button.
"DELETE?" and "ALL" will be
displayed.
II Press the [ENTER] button.
I!IWhen the data has been deleted,
iii "COMPLETED" will be displayed.
Changing the passcode
The passcode for the main unit can be changed.
4 to 8 digits must
be used. The default setting is
1234.
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Change
Code.
II Press the [ENTER] button.
Passcode and "0*******" will be
displayed.
3
Press the [SELECT] (Up/Down)
button to input numbers between 0
and 9.
Up:
Increases the number.
Down:
Decreases the number.