Owner's Manual

Operation
II
Press the [SELECT] (Up/Down)
button to select Device Search.
II Press the [ENTER] button.
"Searching" will be displayed.
~ATTENTION
"FAILED" will be displayed if cell phone cannot
be registered. Repeat Search procedure.
5
Press the [SELECT] (Up/Down)
button to selectthe device name of
the cell phone you want to register.
~ATTENTION
Each time the [SCREENITEXT] button is
pressed, the display changes in the following
way, and you can register the cell phone using
the device address (BD ADD) as well.
Device name
B Device address (BD ADD)
If the device name cannot
be obtained during
the search, "UNKNOWN" is displayed.
II Press the [ENTER] button.
"Waiting" will be displayed.
II
Use the cell phone to input the
passcode.
The default passcode is 1234.
I
When the registration has been
: completed, "COMPLETED" will be
displayed.
The cell phone is now registered.
(:-8 and ~II appear on the display.)
"FAILED" will be displayed if
registration is not successful. Repeat
Search procedure.
54
Delete a registered cell phone
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Select
Phone.
lEI Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select cell phone to be
deleted.
II Press the [ENTER] button.
" Press the [SELECT] (Up/Down)
iii button to select Delete.
II Press the [ENTER] button.
The "Delete ?" message appears on
the display to confirm the cancellation.
I Press the [ENTER] button.
II
"COMPLETED" will be displayed
• when deletion is successful.
~ATTENTION
When a cell phone is deleted, all data
associated will also
be deleted (including
history, preset dial,
and phonebook) from the
main unit.
Connecting a registered cell phone
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Select
Phone.
lEI Press the [ENTER] button.