Owner`s manual

61
How to use an optional Card remote control
[FUNC] button [RTN] button
[SEL] button
[ DISC ] buttons
[ TRACK ] buttons
Switching the remote control settings
Remote control functions can be switched to the three patterns.
Press the [FUNC] button of the main unit.
1
Turn [SEL] button to select a pattern.
4
PATTERN A: Conventional functions
PATTERN B: [DISC ] button...............Repeat
[DISC ] button...............Answer
[TRACK ] button............Next
[TRACK ] button............Previous
Other functions than the above are conventional functions.
PATTERN C: [DISC ] button ..............Option4
[DISC ] button ..............Option3
[TRACK ] button ...........Option2
[TRACK ] button ...........Option1
Other functions than the above are conventional functions.
The pattern is switched in the order of A, B, and C so that the
E-com function can be supported.
Turn [SEL] button to select REMOTE.
2
The remote control function switching mode is activated.
Press the [SEL] button.
3
Press the [RTN] button.
5
Press the [FUNC] button to exit Function Mode.
6
At this time, other adjustments can also be made in Function
Mode.