System information

Hemisphere GPS Using PocketMax3 p/n 874-0012-000 Page 31 of 32
5. Closing PocketMax3
The process of closing PocketMax3 is critical in the proper configuration of your receiver. It is
very important to let PocketMax3, fully close in order to allow it to first configure your receiver
and secondly display a report of the new configuration before exit. When you tap on the ‘X’ in
the upper right hand corner of the program to exit, the following screen will appear.
Figure 5-1 Exit Screen
Save Profile and Disconnect saves a profile with your selected settings to a receiver
configuration file, then saves the configuration to the receiver’s flash memory, then exits the
program.
Save and Disconnect will close the program and save any configuration changes you have
made to the receiver’s flash memory.
Click Disconnect Without Saving if you do not wish to save your modifications to the receiver’s
flash memory. PocketMax3 will exit without saving.
Click Cancel if you wish to return to using PocketMax3.