System information

Hemisphere GPS Using PocketMax3 p/n 874-0012-000 Page 30 of 32
4.2 Exiting Quick Config
Now that you have configured your receiver to output the messages your other software needs,
click the X in the upper right corner to exit.
You will most likely want to click the “Save and Disconnect” button. This will ensure the settings
you just entered will take effect every time your receiver is powered on.
If you do NOT want to save the way you just configured your receiver, select one of the other
options.
For more information on closing PocketMax3 see Section 5 Closing PocketMax3.