System information

Hemisphere GPS Using PocketMax3 p/n 874-0012-000 Page 27 of 32
4. Using Quick Config
Sometimes you may want to simply configure your GPS receiver to output some specific
messages, then save that configuration so you can use your Hemisphere GPS receiver with
someone else’s software. With the numerous screens and features in PocketMax3, it can be a
little confusing how to simply configure the output. In such cases, use the QUICK CONFIG
option to simplify your workflow.
While in Quick Config mode, PocketMax3 will only request messages and define parameters
that you specify for the receiver. This is different than the full PocketMax3 mode, which
requests messages it needs in order to populate the graphical displays etc. with information
from the receiver. When in Quick Config mode, you will not be able to monitor the signal
tracking or receiver performance.
4.1 Quick Config Options
Quick Config allows access to five tabs: “Logs”, “Config”, “Terminal”, “Serial Bridge” and
“About”.
Use the LOGS tab to define which messages to send from the various receiver ports.
Figure 4-1 Quick Config Logs Menu