System information

Hemisphere GPS Using PocketMax3 p/n 874-0012-000 Page 22 of 32
3.2 The LOGS Menu Button
The tabs within the LOGS menu button are NMEA, Raw Data, Binary, Point and Polygon.
Please refer to your receiver’s manual for more information on each particular type of message
that can be recorded. There are three options when logging: to Append to Existing File,
Overwrite Existing File or to Create New File. When appending to or overwriting an existing file,
you must select Browse to choose the appropriate file to modify. If writing a new file, the default
file name of DYYMMDDx.txt is generated, specifying YY(year), MM(month), DD(day), x
(numbers new files to differentiate between multiple files created on the same day). This may be
overwritten with whatever name you wish to assign the file.
The NMEA tab allows you to setup NMEA messages to be logged. You can then browse for the
location of the file and start recording data. When you have collected all of the data, press Stop
to end recording.
Figure 3-3 Logs NMEA Screen