Operation Manual

65
RADIO
Receiving traffic information
When TP or both TP and TA are set to ON, traffic information is received as follows:
■Receiving traffic information when TP is set to ON
[When the AUDIO SOURCE is FM radio]
Set TP to ON, and “TP” is displayed. If there is an available TP station in the AF list, the TP
station is tuned in. If a TP station cannot be tuned in, the “TP” display will flash. When this
happens, press and hold the TUNE/TRACK button for at least 2 seconds to select a TP station
with favorable reception. “TP SEEK” is displayed while a TP station is being selected.
If no TP station can be tuned in, “NOTHING” appears, and the original FM broadcast is
received.
If signal reception becomes poor after a TP station has been received, press and hold the
TUNE/TRACK button for at least 2 seconds to select a TP station with favorable reception.
“TP SEEK” is displayed while a TP station is being selected.
[When the AUDIO SOURCE is something other than AM/FM radio]
Set TP to ON, and“TP” is displayed. If there is an available TP station in the AF list, the TP
station is tuned in.
If a TP station cannot be tuned in, the “TP” display starts flashing and an automatic TP station
search begins. If no TP station can be tuned in, “NOTHING” appears.
■Receiving traffic information when both TP and TA are set to ON
[When the AUDIO SOURCE is FM radio]
Set TP and TA to ON, and “TA” is displayed. If there is an available TP station in the AF list,
the TP station is tuned in. If a TP station cannot be tuned in, the “TA” display will flash and the
automatic TP station search begins. “TP SEEK” is displayed while a TP station is being
selected.
If no TP station can be tuned in, “NOTHING” appears, and the original FM broadcast is
received.
When TA is set to ON, sound from the radio is muted automatically, allowing TA information to
be heard when it is received. While TA information is being received, the system switches to
traffic information interrupt mode and “TA INTERRUPT” is displayed on the screen.
[When the AUDIO SOURCE is something other than AM/FM radio]
Set TP and TA to ON, and “TA” is displayed. If there is an available TP station in the AF list,
the TP station is tuned in. If a TP station cannot be tuned in, the “TA” display will flash and the
automatic TP station search begins. When TA information is received, the current audio
playback is stopped and automatically switched to output traffic information.
While TA information is being received, the system switches to traffic information interrupt
mode and “TA INTERRUPT” is displayed on the screen.