Operation Manual

37
Basic
operation
Switching the map reduction scale
The map reduction scale (map range) can be switched to the desired setting. Also, if a
destination is set, you can select a reduction scale showing the entire route to the destination
with one touch.
The available map scales are different depending on whether miles or kilometers are selected.
● Miles: 1/0.005 million, 1/0.01 million, 1/0.02 million, 1/0.04 million, 1/0.08 million,
1/0.16 million, 1/0.32 million, 1/0.8 million, 1/1.6 million, 1/3.2 million,
1/7.68 million, 1/15.36 million, 1/30.72 million, 1/51.20 million
● Kilometers: 1/0.005 million, 1/0.01 million, 1/0.02 million, 1/0.05 million, 1/0.1 million,
1/0.2 million, 1/0.48 million, 1/0.96 million, 1/1.92 million, 1/5.12 million,
1/10.24 million, 1/20.48 million, 1/40.96 million
To widen the map's range, touch
. To shrink it down, touch
.
● Every time the or switch is
touched, the scale goes up/down one
level.
● After touching or , touch a
number on the scale bar to switch to
the reduction scale represented by that
number.
● Hold or for at least 1 second to
switch the scale without increments
(free zoom).
● The selected reduction scale will be
indicated with a yellow mark ( ).
Switching to the desired reduction scale
Scale bar
● will appear shaded when set to the maximum range (300 mile scale display).
will appear shaded when set to the minimum range (50 yd scale display).
●For safety reasons, the free zoom function and scale bar cannot be operated
while driving.