Operation Manual

204
Helpful tips
1. Situations when a correction is necessary
Correcting the distance
Touch in the menu screen.
Touch for Calibration.
Touch .
● Automatic correction is performed.
Setup
Adjust
Tyre change
●This device performs automatic distance correction using GPS and vehicle
speed signals. Correction may be delayed in the event of a sharp deviation that
overwhelms the automatic correction function, such as changing a tire or
reinstalling the device in another vehicle.
In such a case, drive about 6 miles along a road indicated by favorable GPS
signal reception conditions.
●If correction is impossible, have the device inspected at your local retailer.
●During automatic correction, the vehicle position may be misaligned.
●As a result of the on-board distance compensation learning function, there may
be variations in the progression of the vehicle position mark even if
automatic correction has been completed, depending on the driving conditions.
●Touch in the setup screen to return all items to their default settings.
Default