Operation Manual

140
Navigation guidance
6. Performing operations on the guided route
Redisplaying the all-route display
The all-route display from the start point to the destination can be shown.
Touch when a map is
displayed on the screen.
To u ch
.
● The all-route display screen appears.
● Refer to the section "All-route display
and touch switches" on page 106 for
details of the all-route display screen.
● Touch to display the present
location screen.
Switching the arrival time / remaining time /
remaining distance display
● Remaining time / arrival time
Touch the display to switch between remaining time and arrival time.
● Remaining distance
If there are more than 2 destinations set, the displayed destination can be switched by
touching the remaining distance display
.
If you deviate from the route after route guidance has started, the distance to the destination
in a straight line is indicated.
Touch the arrival time / remaining
distance switch.
● If 2 destinations are set, touch the
arrival time / remaining distance switch
to switch between them.
● If 2 or more destinations are set, the
arrival time / remaining distance for
every destination appears.
● You cannot switch between
destinations if you have deviated from
the set route.
Map view
Route overview
Guide
Required time/Remaining distance display