Operation Manual

107
Navigation
guidance
■ Touch switches
The following operations are performed using the touch switches on the all-route display
screen.
Select from the different routes displayed.
(See page 112)
Change the route search conditions if the route modification screen is displayed.
You can display the route change screen to change the search conditions or add a
destination. (See pages 114, 116)
Route guidance or a demonstration can be initiated.
(See page 120)
After route guidance has started, the display returns to the present location screen.
● Remaining time / arrival time
Touch the display to switch between the required time to destination and arrival time. (See
page 140)
● Remaining distance
If more than 2 destinations are set, the displayed destination can be switched by touching
the remaining distance display (See page 140).
If you deviate from the route after route guidance has started, the distance to the destination in
a straight line is indicated.
3 routes
Route
Guide
●The search result route is a reference route to the vicinity of the destination. It is
not guaranteed to be the shortest, fastest or least congested route.
●The required time is calculated using the average speed of your vehicle.
(See
page 135)
. The actual required time may vary depending on driving conditions.
●In the following situations, 3 routes cannot be displayed:
• When 2 or more destinations are set
• After route guidance has started
●An all-route display can be displayed even after route guidance has started.
(See page 140)